User`s manual

5. Menu and toolbar
Barco – iStudio – R5976569 – user's manual – revision 09 – March-2007
____________________________________________________________________________________
5-35
Network tab
On the Network tab the Hostname, the IP address and the Netmask must be inserted. The indication of the
Gateway is optional.
To send SNMP traps the IP address of a connected service must be specified in the SNMP box. To add an SNMP
recipient press the Add button to open the Add SNMP Manager dialog. In this dialog enter the IP address, of the
SNMP manager, where the SNMP traps should be sent to and click OK. SNMP traps can also be sent to multiple
recipients, if you enter more than one address. In addition the SNMP version v1 or v2c must be specified.
Please see also section
5.3.7 Setup source (Alarm tab) and the description for the Alarms tab below for an instruc-
tion how an SNMP trap is activated for an individual alarm.
Figure 5-27
Module properties dialog – Network tab (left) and Add SNMP manager (right)