User`s manual

5. Menu and toolbar
Barco – iStudio – R5976569 – user's manual – revision 09 – March-2007
____________________________________________________________________________________
5-30
General tab
Figure 5-25
Module properties dialog – General tab
On the General tab the settings of the projection module must be inserted. Insert a unique module name in the
Name field. The name of the wall must be typed into the Wallname field. Take care to insert for each H
YDRA of
the wall the same wall name.
With the X and Y list the position of the projection module within that indicated wall must be specified. The X
coordinate counts from left to right. The Y coordinate counts from top to bottom, seen from in front of the Dis-
play Wall.
With the Region list some properties that depend on regional video standards can be enabled. These properties
are closed captions and XDS for the region US and WSS/VLI and AFD for the region UK. The regions Europe and
Japan have currently the same effect like the region US. The setting of these properties can be found on the VBI
and WSS tab in the Edit Object Dialog on the Properties tab for a video object, please refer to section
5.6.4 Edit
object… .
In the maximum log lines box the maximal number of lines in the log file can be determined. A useful amount
of lines ranges form 100 to 500 lines. Not more than 2000 lines should be used.
The logged information can be displayed by the Module status dialog box, see above.
By means of the Cache checkbox the cache used for the active layout can be controlled. If it is not selected, the
cache will not be used. This leads to a faster update speed, which is above all helpful with larger walls of multi-
ple display modules.