User`s manual

5. Menu and toolbar
Barco – iStudio – R5976569 – user's manual – revision 09 – March-2007
____________________________________________________________________________________
5-28
5.3.3 Module status
The command Module status… displays a message window. You can select one of four kinds of status messages
from the message list: Note, Warning, Error or Alarm. The clear button clears the window such that only new
events will be displayed. With OK you close the window again. Each line displays a message starting with date
and time, when it occurred, continuing with the concerned source or hardware part and finally listing the event.
Figure 5-24
Module status dialog
Note Information about the current configuration as well as operational messages.
Warning Information about a non-standard configuration or a wrong hardware configuration of the HYDRA
(E.g. no output cards are present).
Error Information about internal failures of the HYDRA system software.
Alarm Information about failures of used components like fan/power failure or missing input sources.
An overview about possible event messages can be found in section
7.2 Device related errors.