User`s manual

5. Menu and toolbar
Barco – iStudio – R5976569 – user's manual – revision 09 – March-2007
____________________________________________________________________________________
5-18
Time Setup – Module
Selecting the Module mode enables to choose the time configuration for each module individually. This implies
that the modules are not synchronized with each other.
First select the H
YDRA module you want to configure from the Module list. Then select the synchronization Mode.
The same modes Manual, NTP, NTP Date and LTC/VITC like for the wall configuration can be used. After that
choice enter the values in the same way as explained for the time setup of the wall above.
Figure 5-16
Setup time dialog – Module configuration
Other than in Wall mode in the Module mode, if the time configuration Manual is selected, then
with Get the time of the selected module not of the module connected to the operator PC is dis-
played.