User`s manual

5. Menu and toolbar

Barco – iStudio – R5976569 – user's manual – revision 09 – March-2007

_____________________________________________________________________________________

5-5

5.2 Wall

By means of the Wall menu, the grid toolbar and the shortcut menus, which appear when clicking on the mod-

ules main entry and on the Wall layouts entries in the tree, the wall settings can be accomplished and general

administration can be done.

If multiple H

YDRAS are used to control multiple projection modules all these HYDRA modules can be controlled by

one iS

TUDIO terminal. Therefore the layouts can be combined to a wall layout, which assigns to each projection

module a layout. A wall layout is herewith a combination of layouts on multiple projection modules. Also all

YDRAS of a wall can be controlled commonly (halt, reboot, reset, setup time, etc.).

Figure 5-1

Wall menu (left), grid toolbar (top right) and context menus (bottom right): Modules, Wall layouts and Wall layout

5.2.1 Wall Layout

New wall layout…

With the command New wall layout a wall layout is created. It opens the Create wall layout dialog box.

Figure 5-2

Create wall layout dialog box