User`s manual

5. Menu and toolbar
Barco – iStudio – R5976569 – user's manual – revision 09 – March-2007
_____________________________________________________________________________________
5-3
Edit Objects
Ctrl+O create a new object 5.6.2 New object and fill grid
save the properties of the selected
object
5.6.3 Load, save or delete objects
Ctrl+E edit the properties of the selected
object
5.6.4 Edit object…
Ctrl+X copy the properties of the selected
object and delete the object
5.6.5 Cut, copy, paste and paste new object
properties
Ctrl+C copy the properties of the selected
object
5.6.5 Cut, copy, paste and paste new object
properties
Ctrl+V paste the copied properties in the
selected object
5.6.5 Cut, copy, paste and paste new object
properties
Alt+V create a new object with the cop-
ied properties
5.6.5 Cut, copy, paste and paste new object
properties
Grid
decrease grid by one cell in x- and
y-direction
5.7.9 Increasing and decreasing the grid
increase grid by one cell in x- and
y-direction
5.7.9 Increasing and decreasing the grid
decrease grid by one cell in x-
direction
5.7.9 Increasing and decreasing the grid
increase grid by one cell in x-
direction
5.7.9 Increasing and decreasing the grid
decrease grid by one cell in y-
direction
5.7.9 Increasing and decreasing the grid
increase grid by one cell in y-
direction
5.7.9 Increasing and decreasing the grid
Ctrl+2 2 by 2 grid 5.7.8 Standard grid configurations
Ctrl+3 3 by 3 grid 5.7.8 Standard grid configurations
Ctrl+4 4 by 4 grid 5.7.8 Standard grid configurations
Ctrl+5 5 by 5 grid 5.7.8 Standard grid configurations
Moving Objects and Wall Alarms
Ctrl+M fixed movement active/not active:
objects are aligned to the grid
when moved
5.7.1 Fixed movement
Ctrl+L lock objects active/not active 5.7.2 Lock objects
display wall alarm messages in the
work area
5.2.2 Wall alarms area