User`s manual

4. Basics

Barco – iStudio – R5976569 – user's manual – revision 09 – March-2007

_____________________________________________________________________________________

4-8

4.1.7 Layouts

A layout is a collection of objects with their associated properties. Layouts can be saved for later use. Please refer

to section

5.4 Layout.

• A layout can be saved with the blue save layout button

• The available layouts are listed in the tree. Click on a layout name to load that layout on the work area.

• With the new layout button

the work area is cleared and a new layout can be started.

• To display a layout on the projection module it first must be loaded. Then the

button must be pressed.

4.1.8 Wall layouts

Using multiple HYDRAS with multiple projection modules, an arrangement of layouts can be made to assign each

YDRA a defined layout. Such a wall layout can be created with the Wall menu -> New wall layout ..., see also

section

5.2.1 Wall Layout. The command Load wall layout ... in the same menu or a wall layout item of the tree

can be used to bring a wall layout to the projection modules.