User`s manual

3. Getting started
Barco – iStudio – R5976569 – user's manual – revision 09 – March-2007
_____________________________________________________________________________________
3-4
Once connected to the HYDRA, the initial select mode screen of iSTUDIO will appear in the browser.
Figure 3-3
iS
TUDIO select mode
Click the Admin button or the User button in the upper right corner to log in, depending on your privileges and
intention.
After this a dialog appears that asks, if you want to trust the signed Barco Java applet. This applet is only re-
quired for the functioning of the show viewer command, please refer to section
5.6.9 Show viewer. We recom-
mend confirming it one time with the Always button. This will allow you to use the complete iS
TUDIO functional-
ity without asking at each login for confirmation.
Figure 3-4
Security warning – Java applet
If you confirmed the Barco applet with Always, but later on you want to disable its usage then
simply open the Control Panel (click Start -> Settings -> Control Panel). In the Control Panel se-
lect Java Plug-in, this opens the Java Plug-in Control Panel. Go to the Certificates tab and select
the Signed Applet button. The Barco applet is in the list. Just select it and click the Remove but-
ton. After doing so you will again be asked at each login for confirmation.