User`s manual

3. Getting started
Barco – iStudio – R5976569 – user's manual – revision 09 – March-2007
_____________________________________________________________________________________
3-3
3.2 Switching on and off
This section describes how one or more HYDRAS are switched on or off. In addition if a HYDRA is switched on for
the first time the network settings must be configured, please refer to section
3.2.3 Adjusting a Hydra to the LAN.
3.2.1 Connecting from a user PC to the Hydra
Switch on the HYDRA as explained in the HYDRA user’s manual. Take care that the iSTUDIO CD-ROM is inserted in the
CD-ROM drive. When the startup screen appears the H
YDRA is ready for operation and a connection from an op-
erator PC to the H
YDRA can be set. The default startup screen displays in the upper left corner the IP address of
the H
YDRA.
Figure 3-1
H
YDRA startup screen
Open a web browser on your PC. Type the IP address of the HYDRA into the address bar of the web browser and
click the enter-key.
Figure 3-2
Connecting to H
YDRA using a web-browser