User`s manual

11. Appendix A - Hydra Open Protocol
Barco – iStudio – R5976569 – user's manual – revision 09 – March-2007
__________________________________________________________________________________
11-14
umdposition
Bottom left | bottom
center | bottom right |
top left | top center |
top right
placement of the UMD
umdinside true | false the UMD is displayed in the video (only with video objects)
umdsplitted true | false Splits the two UMD lines:
true: first under and second above the video
false: both UMD’s under the video
umdseparator true | false draw a filled rectangle between the two UMD’s
umdsepcolor color name from rgb.cfg file the separator color
umdforecolor color name from rgb.cfg file the UMD text color
umdbackcolor color name from rgb.cfg file the background color
Video
entry value meaning
source 0 | 1 | 2 | … the source number
translevel 0 | 50 | 100 the transparency level
scramble true | false turn scrambling on/off
scramblelevel
0 | 10 | 20 | 30 | 40 | 50
| 60 | 70 | 80 | 90 | 100
the level of scrambling
tallyon true | false use tallies
tallyshow true | false switch the visibility of the tallies on /off
tallystyle
red – green | green – red
|
red – red | green - green
style of the tally, color combination
tallyshape Square | Round | Fill
The shape of the tallies might be square or round or the
background color may be filled in.
tallypos UMD | border | UMD – border position of the tallies
tallydisabled
Default | UMD color |
border color | user color
The color of a disabled tally
tallydisabledcolor color name from rgb.cfg file
When tallydisabled is set to user color, then this color is
chosen when the tally is disabled.
audioon true | false show audio bars
audioscale
BBC PPM | DIN | Nordic |
VU | Ext VU | AES/EBU
the scale mode of the audio bars
audioplain true | false show plain audiobars (without scales)
barwidth a value between 2 and 29 width of the audio bars in pixels
erroron true | false show errors by blinking the border
errorcolor color name from rgb.cfg file The blinking color of the border in case of an error.
clearcolor color name from rgb.cfg file
The blinking color of the border, if an alarm is solved but
not yet cleared.
errorname true | false show the errorname in the object
xdson true | false Use XDS to get the program name and rating
ccon true | false switch on closed caption
ccvisible true | false show closed captions on screen
ccchannel
CC1 | CC2 | CC3 | CC4 | T1
| T2 | T3 | T4
channel of closed captions
ccusetruetype true | false use a truetype font to display closed captions
cctruetypefont-
name
the name of the truetype font (if ccusetruetype is true)