User`s manual

11. Appendix A - Hydra Open Protocol
Barco – iStudio – R5976569 – user's manual – revision 09 – March-2007
__________________________________________________________________________________
11-13
Layout – Object specific properties
Each object type has its own parameters. In the following the parameters for the types Object, Video, Audio,
Logo, Clock, Timer, Viewer, Application, Text, Stopwatch, Alarm, UMD and Tally are listed. The object type Object
has a special meaning. Its parameters are also parameters of the other object types. Anyhow in this document
they are only listed in the Object section below. (More information:
5.6.4 Edit object…)
Object
entry value meaning
Object
the type of the block: an object of type Object (the below
parameters are also part of the blocks Logo, Clock, Timer,
Viewer, Application, Text, Stopwatch, Alarm, UMD, Tally)
name object name
left a value between 0 and resx location of top-left corner in x-direction
top a value between 0 and resy location of top-left corner in y-direction
width
a value between
32 and (resx – left)
width of the object in pixels
height
a value between
32 and (resy – top)
height of the object in pixels
aspect
none | 4/3 | 4/3 + | 16/9
| 16/9 +
aspect ratio
transparent true | false transparency over video
visible true | false object is not visible on the module
borderon true | false border is visible with the below mentioned settings
borderseparator a value between 0 and 30 invisible border width around the visible border
borderwidth a value between 1 and 20 visible border width
bordercolor color name from rgb.cfg file the color of the border
borderstyle plain | 3D the style of the border
parent
none or the name of an exist-
ing object in this layout
the name of the parent object
position
top left, top right, top
center, left center,
center, right center
The position of the parent object, where position measures
of the child refer to.
displacex
x offset with respect to the position selected in parent
object in pixels
displacey
y offset with respect to the position selected in parent
object in pixels
locksize true | false Lock the object size in the UI
lockxmul 1 | other value
Information about the relative size with respect to the
parent object used to display the object in the GUI.
1 is used if parent is none
lockxdiv 1 | other value see lockxmul
lockymul 1 | other value see lockxmul
lockydiv 1 | other value see lockxmul
umdon true | false switch the UMD’s on /off
umdusetext true | false use the text line specified in the GUI
umdusetext2 true | false use the text line specified in the GUI
umdtext Text line the first text line
umdtext2 Text line the second text line
umdfont the font to draw this line in