User`s manual

7. Error messages
Barco – iStudio – R5976569 – user's manual – revision 09 – March-2007
_____________________________________________________________________________________
7-7
Slot[<nr>] (overlay): Board lost! The software lost connection to the overlay input card:
• Retry <reset module>. When the error keeps occurring, the board
must be replaced; contact the Barco support.
Slot[<nr>], Channel[<nr>]: Board
ª lost
The software lost the specified channel on the board in the specified
slot:
• Retry <reset module>. When the error keeps occurring, the board
must be replaced; contact the Barco support.
Slot[<nr>]: I2c write failure
The software failed to configure a hardware device with the I2C com-
mand:
• Retry <reset module>. When the error keeps occurring, the board
must be replaced; contact the Barco support.
Table 7-4
Hardware and software errors processed by H
YDRA