User`s manual

5. Menu and toolbar
Barco – iStudio – R5976569 – user's manual – revision 09 – March-2007
____________________________________________________________________________________
5-90
5.7.2 Lock objects
If the command Lock objects is checked, objects can not be moved or sized by means of the mouse. This pre-
vents to move them if not intended. Nevertheless objects can be moved and sized with the Edit object menu.
To check and uncheck Lock objects, alternatively use the shortcut key Ctrl+L or the toggle button on the tool bar.
The red corner indicates that Lock objects is checked:
Figure 5-67
Toggle button – Lock objects
5.7.3 Transparent objects
If objects on the work area overlap, they can either be displayed transparent or non-transparent.
• Transparent means, that the borders of the objects behind the one on the top will be visible on the work
area as well, but in a narrow style.
• Non-transparent means, that the borders of the objects behind the one on the top will not be visible on the
work area.
Figure 5-68
Transparent and non-transparent objects in the work area
The command transparent objects determines the appearance of objects on the work area.
To determine the transparency of the content of an object, please refer to section
5.6.4 Edit
object… - Type Tab.