User`s manual

5. Menu and toolbar
Barco – iStudio – R5976569 – user's manual – revision 09 – March-2007
____________________________________________________________________________________
5-87
5.6.7 Hide/unhide object
With the command Hide/unhide object, it can be chosen whether the selected object shall be displayed on the
projection module or not. With the default setting an object is visible as soon as an object type is assigned. To
hide an object, choose the command Hide/unhide object. If an object is hidden, it is crossed out on the work
area. After a refresh it is no longer visible on the display area. The default for a new object is to be visible. Please
refer also to section
5.5.5 Hide/unhide objects where a group of objects gets hidden/unhidden.
Also the
button (Hide/unhide object) from the button bar or the shortcut key Ctrl+H can be used.
5.6.8 Object sizing
The following three commands enable a fast assignment of an object to the dimensions of the grid.
Fit object into grid
The command Fit object into grid expands the selected object to the borders of all cells of the grid that it cov-
ers.
Also the
button (Fit object into grid) from the button bar or the shortcut key Ctrl+T can be used.
If in the Edit object dialog the aspect ratio of the object was fixed, this aspect ratio remains
and the command Fit object into grid just adjusts the width of the object to the width of the
covered grid cells!
Size object to grid
The command Size object to grid adjusts the size of the selected object to the size of one grid cell. The upper
left corner of the object keeps its position.
Also the
button (Size object to grid) from the button bar or the shortcut key Ctrl+S can be used.
If in the Edit object dialog the aspect ratio of the object was fixed, this aspect ratio remains
and the command Size object to grid just adjusts the width of the object to the width of on
grid cell!
Size object to screen
The command Size object to screen expands the selected object to the size of the whole work area.
Also the
button (Size object to screen) from the button bar or the shortcut key Alt+S can be used.
If in the Edit object dialog the aspect ratio of the object was fixed, this aspect ratio remains
and the command Size object to screen just adjusts the width of the object to the width of
the screen!