User`s manual

5. Menu and toolbar

Barco – iStudio – R5976569 – user's manual – revision 09 – March-2007

____________________________________________________________________________________

5-85

UMD tab

On the UMD tab the display of an under monitor display (UMD) can be defined. It provides two lines to display

additional text.

• The Visible checkbox activates or deactivates the UMD lines. The content of the lines is configured individu-

ally:

• If Visible is checked the first line is displayed at any rate.

• If the Text checkbox of the first line is selected, the text inserted in the text box is displayed. If it is dese-

lected the video name is displayed instead. The video name gets specified in the Module properties dialog

box on the Sources tab, please refer to section

5.3.4 Setup module.

• If the Text checkbox of the second line is not selected no second UMD line is displayed. If it is selected either

the text of the second text box or XDS information is displayed. XDS is displayed if it is made visible in the

Edit Object – Properties Tab of a video object.

The other options on that tab define the look and position of the UMD.

• The Font, Foreground, Background lists allow to select the font type and size of the UMD and the color of

text and background.

• The position list defines where the UMD is displayed. Horizontal alignment left, right, middle is combined

with vertical alignment top, bottom. If the two UMD lines are split this entry refers to the first line. The sec-

ond line is displayed on the other vertical position.

• The separator checkbox defines whether there is a separator in a selectable color between UMD and the

content of the object.

• The Inside checkbox can only be used for video objects. If selected the text is displayed on the video instead

of over or under it.

• The Splitted checkbox determines if two lines are displayed one under each other or separately one on top

and one on bottom of the object. The Splitted checkbox can only be used if the second line of UMD is se-

lected.

Figure 5-63

Edit object dialog box – UMD