User`s manual

5. Menu and toolbar
Barco – iStudio – R5976569 – user's manual – revision 09 – March-2007
____________________________________________________________________________________
5-81
Properties tab – Logo
With a logo-object a bitmap can be displayed on the projection module. Non-animated as well as animated bit-
maps can be displayed. The logo can be loaded. Non-animated logos may have gif, jpg or bmp format. Animated
logos may have gif, mpg or avi format.
Whether the checkbox Animation is selected or not, determines if the Name list shows the animated or the
non-animated bitmaps.
To transfer bitmaps to the H
YDRA, please see section 8.1 Data structure and data access.
Properties tab – Clock
A clock-object displays a clock. Different types are available. If the Digital checkbox is disabled, then an analog
clock is displayed. If in addition the Logo-clock checkbox is enabled, then a bitmap is used as background for the
clock. The bitmap could be e.g. a logo. The bitmap can be selected from the list located to the right of the check-
box. How to add files to this list can be seen in section
8.1 Data structure and data access. When enabling the logo-
clock, then the digital checkbox gets automatically disabled.
If the checkbox Digital as enabled, then a clock with digital display is used. In addition it can be chosen whether
the digits are morphing or not and if it is counted up to 12 or up to 24 hours.
Usually a clock displays the time according to the timezone specified in the module properties. If the checkbox
Timezone is enabled, then for this clock a different timezone can be selected. After clicking the ... button ap-
pears the same dialog as explained in section
5.3.4 Setup module. In addition time offset can be specified. Just
select the respective number of hours from the Offset list. This property can be used for analog clocks or digital
clocks, but only after morphing is selected.
Finally for the Foreground and the Background of the clock the iS
TUDIO colors are available.
When clocks are put ahead due to day light savings or for other reasons clocks will adapt to this
time within one minute.
Figure 5-59
Edit object dialog box – Properties of logo (left) and Properties of clock (right)