User`s manual

5. Menu and toolbar
Barco – iStudio – R5976569 – user's manual – revision 09 – March-2007
____________________________________________________________________________________
5-75
Tab Options description
WSS
Properties of wide screen signaling (WSS) and video index information
coding (VLI)
Mode
Select which signal standard is provided; other choices are enabled de-
pending on this
Color Select the color the indicator should have
Aspect ratio (UK)
Follow aspect
ratio changes
Default
Indicator
Aspect ratio of the video object gets always adapted to the aspect ratio of
the video
Default aspect ratio if the WSS signal is not available
An indicator is displayed if WSS or VLI is available
AFD (UK)
Lines
Indicator
Show deviation
from standard
Selectable, if the mode WSS/AFD or VLI/AFD has been selected.
With this option selected two red lines are displayed. They mark the area
where the intrinsic video is displayed.
An indicator is displayed, if AFD is available.
The indicator changes to the error color, if the detected video signal devi-
ates from the specified standard.
ETSI (UK)
Lines
Indicator
Selectable if the mode ETSI has been selected
With this option selected two red lines are displayed. They mark the area
where the intrinsic video is displayed.
An indicator is displayed if ETSI is available
Action Safe
/ Graphics
Safe
Enabled Activates the display of the action safe or graphics safe border
Width Thickness of the border in pixels
Color Color of the border; any color but black is visible on video
Shadow Enabled
Activates the display of a border shadow
Color Color of the border shadow
X-dist / Y-dist
Distance of the video border to the action safe or graphics safe border in
steps of thousandths of the video dimensions
4/3 / 16/9 Sets the default settings for videos with 4/3 or 16/9 aspect ratio
Markers Enabled Activates the display of two vertical markers
Width Thickness of the markers
X-dist
Distance of the video border to the marker in steps of thousandths of the
video dimensions
Color Color of the markers; any color but black is visible on video
Table 5-13
Options on the video properties tabs
Properties where a region is indicated, can only be selected if the respective region is
selected for the module, please refer to section
5.3.4 Setup module, otherwise these properties
appear dimmed.
Please refer to the H
YDRA user’s manual to see which properties are supported by which
input cards.