User`s manual

5. Menu and toolbar
Barco – iStudio – R5976569 – user's manual – revision 09 – March-2007
____________________________________________________________________________________
5-74
When configuring hardware tallies of a Quad input card, there are also three tallies offered
even though for Quad SDI input card and Quad analog input card there are only two tallies
available; only the combination of tally 1 and tally 2 may be selected!
For Streaming video card no tally can be selected at all!
Tab Options description
Error Behavior of the video window in case of an alarm
Color
Clear
Show alarm name
Visible
Select the color of the object border to sign an alarm
Select the color of the object border to sign a cleared alarm
The name of the most recent alarm that is active is displayed besides the
window border. If several alarms are active a plus sign + behind the
alarms name is displayed.
The above settings are applied in case of an alarm or not.
VBI Display of various types of vertical blanking interval (VBI).
CC (US) Display of closed captions (CC).
Indicator
Visible
Use True Type
Font
An indicator is displayed, if closed captions are available
The selected channel is displayed.
The usage of the true type font Arial for closed captions is activated. This
allows better scaling capabilities for small windows and an enhanced
character set.
XDS (US) Display of Extended data structure (XDS)
Visible
Display XDS or not
The XDS is displayed in the second line of the UMD, see section Edit
object – UMD tab, below.
TT (UK) Display of teletext (TT).
Indicator
Visible
TT page number
Use True Type
Font
An indicator is displayed if teletext is available
Teletext is displayed
Selection of the respective teletext page
The usage of the true type font Arial for teletext is activated. This allows
better scaling capabilities for small windows and an enhanced character
set.
VITC Display of Vertical interval time code (VITC)
Visible
Display the VITC of the source or not
The VITC is displayed in the form hh:mm:ss:ff, where hh is hours, mm is
minutes, ss is seconds and ff is frames.
If VITC is not present –:–:–:– is displayed instead.