User`s manual

3. Getting started
Barco – Hydra Compact – R5976568 – Revision 14 – September-2007
________________________________________________________________________________________
3-4
The Back
The back of your H
YDRA COMPACT looks like this or similar:
1
5
16 1
7
18 19 20 21 2
2
23 24 25 26
14 14a
27 28 29
3431 3
2
3330
14 single board computer
14a serial port extension of single board computer
15 overlay input
16-26 slots for video and RGB input cards and output cards
e.g. 16 – 19 HD SDI input cards,
20 output card,
21 – 26 empty slots
27 power module 1
28 power module 2
29 power module 3
30 bracket
31 securing screw
32 mains connection 1
33 mains connection 2
34 mains connection 3
Figure3-2
Rear view of H
YDRA COMPACT
All boards are inserted in the middle and right part of the back of HYDRA COMPACT. On the left there is the single
board computer [14] and the overlay input card [15]. Next to them there are 11 slots available to integrate
input cards for video- and RGB sources, and different type of output cards.
On the left side of the back of H
YDRA COMPACT is the power supply located consisting of three power modules
[27-29] one under the other. Each is equipped with a mains connection [32-34] and can be connected to an in-
dependent power net.
To protect H
YDRA COMPACT from overheating, the air supply openings in the case shall be kept
free of obstructions!