Operating instructions

System manual ImageTile 92
BarcoMetheus DPMS Screen Saver Options
From the “Barco Metheus DPMS Screen Saver Control Panel” you
can change many DPMS screen saver elements simultaneously. The
DPMS screen saver elements in each scheme are work schedule,
work day screen saver, DPMS settings after work day, and many
additional options.
Current Scheme
Lists the three “DEFAULT” schemes which you can use as they are.
Or you can modify them to meet your office’s schedule.
Save As
Saves your current Barco Metheus DPMS Screen Saver settings. The
name you specify will appear in the Scheme list so you can easily
restore these settings later.
Delete
Deletes the scheme that is selected in the Scheme box.
Work Schedule
Select the begin and end times for each work day. If the system is not
expected to be used, leave both start and end work day times as the
same time.
Begin Work Day
The “Begin Work Day” time is the time after which the system is
expected to start being used. During the work day, the screen saver
selected by the user in the “Screen Saver During Work Day” section is
used during user inactivity.
End Work Day
The “End Work Day” time is the time after which the system is not
expected to be used any more for that day. After the work day, the
display is set to one of the DPMS states (Stand-By, Suspend, or Off)
by the imaging board during user inactivity.
Screen Saver During Work Day
On CRT based monitors, such as the Barco MGD series, a “regular”
screen saver can be invoked during user inactivity during the
BarcoMed software driver installation