Operating instructions

INTRODUCTION
ImageTile installation overview
To install the ImageTile system completely, you have to follow these
steps:
1 Install the imaging board(s) in the PC
2 Install the ImageTile and connect the signals from the PC
3 Install the BarcoMed driver software
4 Setup Sentinel
5 Install the MediCal software
6 Use MediCal
ImageTile features
ImageTile
For enterprise-wide image distribution in a softcopy reading
environment, Barco has designed IMAGETILE®. This digital lightbox
system, combining 20.8" portrait LCD displays, 10-bit graphics
controllers and MEDICAL® Pro QA management software, offers
unprecedented image quality for accurate diagnoses (quad-head
system with 6144 x 2048 pixels or dual-head system with 3072 x 2048
pixels).
IMAGETILE® can be used in PACS reading rooms as well as any
location where softcopy images are required, such as ER, OR and
internist rooms.
IMAGETILE® can be a dual-head or quad-head system.
Sentinel
The built-in SENTINEL
®
board and software turn IMAGETILE
®
into an
intelligent, web-enabled device, which can be addressed via the
facility network through a user-friendly browser interface.
Thanks to Sentinel, you can consult a number of the panel's settings
online, on any PC connected to the network.
Moreover, Sentinel can generate e-mails to user-defined addresses in
case a setting exceeds a warning or error tolerance level.
Overview