Operating instructions

System manual ImageTile 89
“Update Device...” Button: Clicking this button will run the BarcoMed
Hardware Configuration Wizard. This program allows the user to
flash update the firmware stored in the ROM of the currently selected
BarcoMed imaging board. The BarcoMed Hardware Configuration
Wizard is a “wizard style” application that uses dialog boxes to guide
the user through the flash update procedure. The user will be
prompted to select a firmware update file to use for the update.
Therefore you will need a firmware update file for your specific
BarcoMed imaging board in order to update it’s firmware. This file will
be provided by BarcoView if and when a firmware update is required.
Special Note: The BarcoMed Hardware Configuration Wizard is
applicable only for AURA-based imaging boards.
BarcoMed software driver installation