Operating instructions

System manual ImageTile 88
PCI Information
Device ID: Displays the device’s PCI Device ID number.
Vendor ID: Displays the device manufacturer’s PCI Vendor ID
number.
Subsystem ID: Displays the device’s PCI Subsystem ID number.
SubsystemVendorID: Displays the device’s PCI Subsystem Vendor
ID number.
VGA Status: Displays whether the VGA capabilities of the BarcoMed
board are enabled or disabled.
Firmware Information
Product Name: Displays the name of the BarcoMed imaging board
installed in the selected PCI slot.
Serial Number: Displays the serial number of the BarcoMed imaging
board installed in the selected PCI slot.
VGA Bios Version: Displays the VGA Bios version for the BarcoMed
imaging board installed in the selected PCI slot.
Firmware Version: Displays the firmware version for the BarcoMed
imaging board installed in the selected PCI slot.
Hardware Version: Displays the Hardware Version for the BarcoMed
imaging board installed in the selected PCI slot.
“Advanced ...” Button: By clicking on this button, the user can
display more information about the BarcoMed imaging board installed
in the selected PCI slot.
“Generate Report” Button: Clicking this button will produce two
reports. It will first run the Windows Diagnostics program which will
generate a report that is saved to a text file. For Windows XP and
Windows 2000, this file will be saved on the c:\ drive and it will be
named BarcoMetheusReport.txt. For Windows NT 4.0, this file will be
saved on the desktop and it will have the same name as the machine
for which the report is being generated. The other report that is
generated contains information about the Barco display adapters
installed in the system and will be named BarcoMedDeviceInfo.txt.
This report will be saved on the desktop. These files can be emailed
to our customer support department when reporting a problem. To
locate the closest BarcoView Support office, see the Support section
on www.barcomedical.com. If your system is connected to the internet
and a web browser is installed you can click on the link at the top of
the BARCO Metheus Hardware Configuration Tab to get to our web
site.
BarcoMed software driver installation