Operating instructions

System manual ImageTile 86
To access the BARCO Metheus Hardware Configuration Tab do the
following:
1. Open the “Display Properties Control Panel” by right clicking on the
desktop, then select “Properties”.
2. Under Windows NT 4.0, Click on the “BARCO Metheus Hardware
Configuration” Tab. (see figure 56, below).
Under Windows 2000 and Windows XP, click on the “Settings” tab.
Double click on the rectangle that represents the BarcoMed
3MP2FH to bring up its property page. Click on the “BARCO
Metheus Hardware Configuration” tab (see figure 57, on the next
page).
Figure 56: BARCO Metheus Hardware Configuration Tab
under Windows NT 4.0
BarcoMed software driver installation