Operating instructions

System manual ImageTile 67
next to “Enable the DualView device.”, and click “Next” to
continue.
Figure 41
12. The screen shown in figure 42 displays the device(s) that will be
installed. If you want to change your selection, click Back and you
will see the previous screen. To begin installation, click “Next” to
continue. If you want to end the installation without installing the
driver, click “Cancel” and the Wizard will exit.
Figure 42
13. Prior to beginning the installation the BarcoMed Driver Install
Wizard will warn you that while the driver is being installed your
display may flicker (figure 43). Click “OK” to continue.
BarcoMed software driver installation