Operating instructions

System manual ImageTile 59

Installing DualView under Windows 2000

DualView allows a dual head graphics board to display two separate

desktops, one for each monitor instead of a single virtual desktop that

spans across both monitors. Figures 32 and 33 below illustrates the

difference between running without and with DualView enabled under

Windows 2000. DualView is a feature that is supported by Windows

XP. However, BARCO has provided a means for the user to enable

this functionality while running Windows 2000.

Figure 32: Windows 2000 Display Properties Control Panel

with DualView disabled.

Note: The system shown in figure 32 above is a dual-head, single

BarcoMed 3MP2FH Imaging Board, no 3

party VGA card, DualView

disabled configuration, your system may look different.

BarcoMed software driver installation