Operating instructions

System manual ImageTile 37
Figure 5
3. The Device Selection Screen (see figure 6) shows those devices
supported by the driver. The application does not detect the
physical hardware. You may choose only one type of device to
install since Windows NT supports only one type of a device at a
time. After you’ve selected the device you want to install, click
“Next”.
Figure 6
If you selected a device with an existing driver, the existing driver’s
version will be compared against the version of the driver you are
installing. If the existing driver’s version is newer than the one you
are installing, the Wizard will warn you that the current driver is
newer than the one you are installing (see figure 7). If you choose
to continue, your existing driver will be replaced. Click “OK” to
continue.
Figure 7
If you want to change your selection, click “OK” to continue and
then click “Back” on the next screen.
BarcoMed software driver installation