Operating instructions

System manual ImageTile 20
HARDWARE INSTALLATION
Notice: Wear a protective ESD strap during installation or handling of
the board. Electrostatic charges can damage the board.
Familiarizing Yourself With the 3MP2FH
Prior to installing your 3MP2FH board(s) in your PC please take a few
minutes to familiarize yourself with both the board and the PCI slots in
your computer.
Figure 1: The 3MP2FH
Switch Locations
There are four switches located at SW1 on the 3MP2FH. The
following table shows their locations and briefly describes their
functions and default states.
Imaging board installation