Operating instructions

System manual ImageTile 18
PLANNING YOUR 3MP2FH
INSTALLATION
Important installation considerations
Preparations before installation
1 Make certain all equipment is switched off.
2 In case you use a PCI expansion chassis, please install it following
the guidelines in its User’s Guide.
3 Familiarize yourself with the 3MP2FH Imaging Board and the
cables used to connect it to the display panel.
4 Read through this guide from beginning to end.
Operating system requirements
You must have Windows NT 4 with at least Service Pack 4,
Windows 2000 with at least Service Pack 1 or Windows XP installed
on the PC.
BarcoMed installation overview
To install the BarcoMed Imaging Boards in your system, you have to
follow these steps:
1 Install the imaging board(s) in the PC
2 Install and connect the displays to the imaging board(s)
3 Install the BarcoMed driver software
Imaging board installation