Operating instructions

System manual ImageTile 110
Acquiring an IP-address dynamically
Proceed as follows:
1 Make sure the connected computer supplies an image to the
ImageTile panel.
2 Make sure the ImageTile is connected to the network, using the
network connector on the ImageTile itself.
3 Run the application "sentinel.setup" from the
Start -> Programs -> Sentinel menu.
The Sentinel Network Configuration dialog appears.
Sentinel setup
4 Check the option DHCP server available.
5 Enter the IP-address of your mail server in the field Mailhost IP.
For the correct address, consult your network administrator.
6 Enter a name for the ImageTile panel in the field Hostname. Enter
the name of your computer network domain in the field Domain.
7 Click on OK.
8 As a result, the DHCP server will find an IP-address for the
ImageTile and the computer will try to establish communication.
When the communication has been established, the following
message appears: