Operating instructions

System manual ImageTile 109
Sentinel setup
Important:
Write down the IP-address for future reference: You will need it to
browse to the ImageTile later.
Click on OK to close the message.
Then click on Cancel in the Sentinel Network Configuration dialog
to finish.
11 When the communication with the ImageTile failed, the following
message appears:
Click on OK to close the message and enter the correct data in the
dialog.
If the problem persists, please refer to the chapter "Connection
problems" below.
10 As a result, the computer will try to establish communication with
the ImageTile panel. When the communication has been
established, the following message appears: