Instruction manual

62 ImagePRO-II • User’s Guide

4. Menu Orientation

Configuring Outputs

• For HD-15 Sync, the available options are:

~ CVBS / YC / SOG/Y / CSync

~ +H+V

~ +H-V

~ -H+V

~ -H-V

The default setting for HD-15 Sync is SOG/Y for most formats. For NTSC and

PAL, the default setting is CSync with equalizations on.

• For the HD-15 SOG/Y option, the options are:

~ Standard

~ Tri-level

~ Not available (n/a), if HD-15 Sync is anything other than SOG/Y

pÉííáåÖ=íÜÉ=paf=qóéÉ

The ImagePRO-II supports single-link SDI video, and can support dual-link SDI with the

3D/Dual Channel mezzanine installed. The system supports SD, HD, and 3G SDI (Levels A

and B).

To view or change SDI settings, select Output > SDI Type. The SDI Type Submenu,

shown in the following figure, appears.

Figure 4-37. SDI Type Submenu

On this menu:

• SDI Link displays the type of SDI link, either Single or Dual. Dual is only

available as an option if the 3D/Dual Channel mezzanine is installed and the

system mode is set to Dual2K.

• SDI Type settings include SD, HD, 3G Level A or 3G Level B. This field provides

only those options that are compatible with the output format for the connector.

For example, if the output format is 1080p@24, SD is not an available option.

Similarly, the 3G Level A and 3G Level B options are only available if the output

format supports updating from one level to another; otherwise, the available level

is displayed.

The SDI 2 Type line is only available as an option with the 3D/Dual Channel

mezzanine installed.

SDI TYPE

> SDI Link Dual

SDI 1 Type HD

SDI 2 Type