Instruction manual

ImagePRO-II • User’s Guide 43
4. Menu Orientation
Configuring Inputs
Figure 4-11. 16:9 Image (top) with 5:4 Masking Preset (bottom)
The image on display is the base image to which the mask is applied. If an image has
already been masked to a 5:4 aspect ratio, and you mask it again using the 1:1 preset, the
system creates the 1:1 mask using the previous 5:4 image as a base. The result looks like
the one in the following illustration.
Figure 4-12. Result of Applying a 1:1 Mask to a 5:4 Masked Image
oÉëÉííáåÖ=j~ëâáåÖ=bÑÑÉÅíë
 To restore the original image after masking it, use the following procedure:
1. Select the input that displays the masked image, if it is not already displayed.
2. On the Input Menu, select Sizing Adjust.
3. Scroll to Reset Mask and press SEL.
All masks are removed, including mask presets.