Instruction manual

42 ImagePRO-II • User’s Guide
4. Menu Orientation
Configuring Inputs
6. Press SEL to confirm your choice.
rëáåÖ=j~ëâ=mêÉëÉíë
The Mask Presets feature on the input Sizing Adjust Submenu provides a convenient
way to mask all the edges of an image at once, to a preset aspect ratio. The following figure
shows the available aspect ratios.
Figure 4-10. Mask Presets Submenu
• Select Set to 16:9 to mask the image to a 16:9 aspect ratio.
• Select Set to 5:4 to mask the image to a 5:4 aspect ratio.
• Select Set to 4:3 to mask the image to a 4:3 aspect ratio.
• Select Set to 3:2 to mask the image to a 3:2 aspect ratio.
• Select Set to 1:1 to mask the image to a 1:1 (square) aspect ratio.
As with any mask, presets are additive and are applied to the edges of the image. If you
mask a 16:9 image to a 5:4 aspect ratio, the result looks like the lower image in the
following illustration.
Note
To restore the original unmasked image, refer to Resetting
Masking Effects on page 43.
MASK PRESETS
> Set to 16:9
Set to 5:4
Set to 4:3
Set to 3:2
Set to 1:1