Instruction manual

36 ImagePRO-II • User’s Guide

4. Menu Orientation

Configuring Inputs

fåéìí=jÉåì=cìåÅíáçåë=~åÇ=pìÄãÉåìë

The following Input Menu functions and submenus are covered in this section:

Setting the Input Format

Resetting Masking Effects

Selecting the Input Type Adjusting Timing Parameters

Selecting the Colorspace Adjusting Edge Timings

Using 1:1 Sample Setting Input Contrast and Brightness

Setting the Aspect Ratio Setting Input Color Balance

Sizing an Image Adjusting Gamma

Masking an Image Processing Input Signals

Using Mask Presets About Input Configurations

pÉííáåÖ=íÜÉ=fåéìí=cçêã~í

The input video Format is indicated in the status display and in the Input Menu, in the form

HactxVact @ vr Hz:

 Example: 1024x768 @ 75 Hz

When In Auto Acquire is On, the input video format is detected in the following search

order: last used configuration, any saved configurations, custom library formats, standard

library formats, or a “best guess” based on the closest video format in the library.

If the video format is a best guess, it is displayed within asterisks:

 Example: *1024x768 @ 60.11*

If the video format is recalled from a saved input configuration, the format appears with a

“c” at the far right:

 Example: 1024x768 @ 59.94 c

If the video format is frame packed, the format appears with the letters “FP” at the end:

 Example: 1920x1080p @23.98FP

When In Auto Acquire is Off, the ImagePRO-II attempts to lock to the signal you select. If

the format you select does not match the input signal, the display remains black and the

status display indicates Invalid Signal.

For more information about In Auto Acquire, refer to the Acquiring an Input Signal

section on page 72.

pÉäÉÅíáåÖ=íÜÉ=fåéìí=qóéÉ

Input Type defines the type of input connected to the ImagePRO-II, such as RGB, DVI-I, or

HDMI.

First, select an input. Then, from the Input Menu, scroll to Type and select a value.

Available choices depend on the input you select:

• For Input 1 (DVI-I), the options are RGB, YP

, YC, CVBS, DVI-I.

• For Input 2 (HD-15), the options are RGB, YP

, YC, CVBS.

• For Input 3 (HDMI), the option is HDMI.

• For Input 4 (DisplayPort), the option is DP.

• For Input 5 (SDI-1) and Input 6 (SDI-2), the option is SDI.