Instruction manual

ImagePRO-II • User’s Guide 33
4. Menu Orientation
About the Status Menu
• The second line indicates:
~ The Genlock status for the output channel. The options are:
• EXT Lock to external source
• N# Lock to input number...
• N/A Freerun (default)
~ The type of input signal being processed. Options are CVBS, YC, SDI,
RGB, YPbPr, DVI-I, HDMI and DP.
~ If the system is set to 3D mode, this line also displays information about
the 3D packing mode:
• Side: Side-by-Side
• T/B: Top/Bottom
• SEQ: Sequential
• L/R: Left/Right
• The third line provides the output format for the first available output channel. For
the standard ImagePRO-II, there is one available channel, Channel A. With the
3D/Dual Channel mezzanine installed and the system set to Dual2K mode, a
fourth line is added, displaying information for the second channel.
 Example: CHA: 1920x1080p @ 60
 Example: CHA: 920x1080i @60
CHB: 1280X720p @60
• In addition, when you install the 3D/Dual Channel option and set the system mode
to 3D, the fourth line displays the 3D packing format, as shown in Figure 4-9 on
page 32.