Instruction manual

32 ImagePRO-II • User’s Guide
4. Menu Orientation
About the Status Menu
^Äçìí=íÜÉ=pí~íìë=jÉåì
The Status Menu is the ImagePRO-II’s top-level menu, which appears by default at system
startup. This menu provides input, Genlock, and output information. The following figure
illustrates a sample Status Menu if you use the standard ImagePRO-II.
Figure 4-7. Status Menu (sample)
When you install the 3D/Dual Channel option and set the System Mode to Dual2K, the
Status Menu displays default information for two output channels, as shown in the following
illustration. For details about dual-channel mode, refer to Operating the ImagePRO-II in
Dual-Channel Mode on page 106 of this chapter.
Figure 4-8. Status Menu -- Optional Dual Channel System Mode (sample)
The following illustration shows the Status Menu when you install the 3D/Dual Channel
option and set the System Mode to 3D. For details about 3D mode, refer to Operating the
ImagePRO-II in 3D Mode on page 114 of this chapter.
Figure 4-9. Status Menu — Optional 3D System Mode (sample)
Although the specific information displayed in this menu varies according to the input
selected, the Status Menu always provides the following details:
• The first line shows the format of the active input in the form Hact x Vact @ vr Hz
 Example: 1280x1024p @ 59.94 Hz
If you use a custom configuration for the input, the first line shows the name of
your configuration. If the selected input does not detect a valid input signal, the
first line displays Invalid Signal.
IN: 1280x1024p @59.94
Genlock: N/A DVI
CHA: 1920x1080p @60
IN: 1024x768 @59.94
Genlock: N/A RGB
CHA: 1280x720p @60
CHB: 1280x720p @60
IN: 1024x768 @59.94
Genlock: N/A 3D: SEQ
CHA: 1280x720p @60
3D: SEQ