Instruction manual

ImagePRO-II • User’s Guide 9
2. Hardware Orientation
ImagePRO-II Front Panel
8) FRZ Button
FRZ (FREEZE) enables you to freeze a displayed image. Refer to The FRZ
Button on page 11 for more information.
qÜÉ=aáëéä~ó=pÉÅíáçå
The Display Section consists of a 4-line x 24-character screen that shows all
ImagePRO-II menus, sub-menus, and messages. The display is dimmable.
At system startup, or when no menu buttons are selected, the screen displays the Status
Menu. The following illustration shows a sample Status Menu for the standard
ImagePRO-II. For information about the contents of this menu, refer to the section titled
“About the Status Menu
” on page 32 of Chapter 4.
Figure 2-2. Status Menu (sample)
qÜÉ=jÉåì=k~îáÖ~íáçå=pÉÅíáçå
The Menu Navigation Section includes three controls that aid in menu navigation:
• Turn the ADJUST knob to scroll through the menu items on the screen.
~ Turn the knob counter-clockwise to scroll down.
~ Turn the knob clockwise to scroll up.
A navigation cursor (>) to the left of a menu item indicates the position of the
scroll bar, as shown in the following illustration.
Figure 2-3. Navigation Cursor in the Transition Menu
• Press the SEL button to:
~ Enter the Setup Menu tree from the Status Menu
~ Select the menu item indicated by the navigation cursor
~ Change or accept a parameter
~ Answer Yes to menu queries
• Press the ESC button to exit a menu without making changes, to cancel an
operation, to answer No to menu queries, or to return to the Status Menu. Each
press takes you back up the menu tree one level.
IN: 1280x1024p @59.94
Genlock: N/A DVI
CHA: 1920x1080p @60
TRANSITION
> Trans With Blk Fade
Trans Time 1.0
SEL
ESC