Instruction manual

8 ImagePRO-II • User’s Guide
2. Hardware Orientation
ImagePRO-II Front Panel
fã~ÖÉmolJff=cêçåí=m~åÉä
The figure below illustrates the ImagePRO-II front panel.
Figure 2-1. ImagePRO-II Front Panel
Following are descriptions of each front panel control feature:
1) Chassis Handles
Two Chassis Handles are provided for ease of installation and transportation.
2) USB Port
The USB port is provided to support uploading and downloading system
configurations and logos, and upgrading ImagePRO-II firmware.
3) Display Section
The Display Section consists of a four-line display screen. Refer to The Display
Section on page 9 for complete details.
4) Menu Navigation Section
The Menu Navigation Section includes the ADJUST knob, and two navigation
buttons: SEL and ESC. Refer to The Menu Navigation Section
on page 9 for
more information.
5) Menu Access Buttons
The Menu Access Buttons provide quick access to specific locations in the
menu system. Refer to Menu Access Buttons on page 10 for complete details.
6) Input Buttons
The five numbered Input Buttons correspond to the five rear-panel input
connectors. Refer to Input Buttons on page 11 for information about the inputs.
7) LOGO and BLACK Buttons
The LOGO button enables you to capture a stored still image, and transition to
and from the logo. Refer to the The LOGO Button
section on page 11 for more
information.
The BLACK button transitions the display image to and from black. Refer to The
BLACK Button on page 11 for details.
1
3
5
2
8
1
6
4
7
1) Chassis Handles 4) Menu Navigation Section 7) LOGO and BLACK Buttons
2 USB Port 5) Menu Access Buttons 8) FRZ Button
3) Display Section 6) Input Buttons