Instruction manual

206 ImagePRO-II • User’s Guide
B. Remote Control Protocol
Legacy Remote Commands
qok=íóéÉ=áå
• Description: Selects transition type when switching between inputs. Transition
delay is only applicable if the transition type selected is Fade to Black or Fade to
Logo. Fade to Logo transition type is only available if a Logo has been stored in
non-volatile memory.
• Parameters:
type: Transition type [0-2]
0 = Fade to black, 1 = Freeze image and Cut, 2 = Fade to logo
in: Transition delay (in seconds) [1.0s - 5.0s]
• Query Format:
TRN?
Returns the current transition type and transition delay in the format
= type in
 TRN 1 2.0 (Selects fade to black transition in 2 seconds.)
 TRN? (Queries transition type and transition delay.)
rkfqfa
• Description: Identifies the ImagePRO-II unit ID number and type
tel^obvlr
• Description: Returns product name: "ImagePRO-II"
• Parameters: None
wllj=åååKå
• Description: Selects zoom scale factor (applied both horizontally and vertically)
• Parameters: nnn.n: Zoom value [min-max] depends on scale factor
• Query Format:
ZOOM?
Returns the current zoom scale factor in the format
= nnn.n
 ZOOM 200.0 (Zoom into the image using a 200.0% scale factor)
 ZOOM? (Queries current zoom scale factor.)