Instruction manual

204 ImagePRO-II • User’s Guide
B. Remote Control Protocol
Legacy Remote Commands
m^kes=ÜÜÜKÜ=îîîKî
• Description: Set Output Diagonal Pan.
• Parameters:
hhh.h: Horizontal Pan (-100.0% - +100.0%)
vvv.v: Vertical Pan (-100.0% - +100.0%)
• Query Format:
PANHV?
• Query Response: Output Diagonal Pan value in the following format:
= hhh.hvvv.v
 PANHV 50 50 (Set Output Horizontal Pan to 50%, and Vertical Pan to 50%)
 PANHV? (Query Output Horizontal Pan)
m^ks=åååKå
• Description: Set Output Vertical Pan
• Parameters: nnn.n: Vertical Pan (-100.0% - +100.0%)
• Query Format:
PANV?
Returns the Output Vertical Pan value in the format
= nnn.n
 PANV 50 (Set Output Vertical Pan to 50%)
 PANV? (Queries Output Vertical Pan)
obpe
• Description: Query the available resolution list for the ImagePRO-II.
• Parameters: None
• Returns all available resolutions in the format:
n : HxV @F (example: 20 : 1024x768 @59.94)
 RESH (Query all available resolutions)
obpf=åå
• Description: Set the current channel’s Input Resolution. If In Auto Acquire is on,
setting input resolution with this command may be overridden.
• Parameters: nn: Input Resolution (use RESH command for resolution list)
• Query Format:
RESI? in
Returns the Input Resolution for the specified channel in the format
= nn
 RESI 1 (Set Input Resolution of currently selected input channel to resolution
index 1 (NTSC(480i))
 RESI? 1 (Queries input Resolution for Channel A)