Instruction manual

202 ImagePRO-II • User’s Guide
B. Remote Control Protocol
Legacy Remote Commands
• Parameters:
filename: The name you give to the configuration when you save it. If
the same input configuration name exists, it will be overwritten.
in: Input chnl (1-6)
 ICSAV 3 file1 (saves Input configuration as FILE1 for input channel 3.)
f`rpb=áå
• Description: Query the name of the Input configuration used for the specified
channel.
• Parameters:
in: Input chnl (1-6)
• Returns: Name of the Input configuration used (if any)
 ICUSE 1 (Lists names of saved input configurations used by channel 1.)
il`hlrq====
• Description: Locks and unlocks the front panel
• Parameter: mode [0 | 1] Off | On
 LOCKOUT 1 (Lock the ImagePRO-II front panel from user access.)
ildla
• Description: Delete Logo image from non-volatile memory. Selecting Black/
Logo will now display black.
• Parameters: None
 LOGOD (Delete saved Logo image.)
ildlf
• Description: Query the stored Logo image resolution.
• Parameters: None
 LOGOI (Query Logo resolution.)