Instruction manual

200 ImagePRO-II • User’s Guide
B. Remote Control Protocol
Legacy Remote Commands
• Analog Output Level (level):
0=+4dBu
1=-10dBV
• Output Delay (delay):
-1=Auto
0-300=0-300 milliseconds
• Output Rate (rate):
0=48kHz
1=96kHz
• Bitdepth (bitdepth):
0=16 bit
1=20 bit
2=24 bit
 Examples: To set channel 0 audio output level to -10dBV
AUDIOOUT --och 0 --level 1
iÉÖ~Åó=oÉãçíÉ=`çãã~åÇë
The following commands have been carried over from the original ImagePRO.
^`n=ãçÇÉ
• Description: Turns input Auto acquisition mode off/on.
• Parameters: mode [0 | 1]: Off | On
• Query Format:
ACQ?
Returns Auto acquisition mode in the format
= mode
 ACQ 0 (Turns auto acquisition mode off)
 ACQ? (Queries for auto acquisition mode)
bcifpq
• Description: Lists the names of all saved custom formats.
• Parameters: None
• Returns: List the names of saved custom formats, one name per line.
 EFLIST (Lists all saved custom formats.)
c^ab=ãçÇÉ=íáãÉ
• Description: Fade input to black or out of black with the given transition time in
seconds.
• Parameters: mode [0 | 1]: Fade to live | Fade to black