Instruction manual

ImagePRO-II • User’s Guide 195
B. Remote Control Protocol
ImagePRO-II Remote Commands
--cinv (invert) --csp (colorspace) --gamma (gamma)
--mono (monochrome)
• Query Format 2 (Output):
VIDCOL --och (output channel) --?
• Query Response 2: Video Color Settings in the following format
VIDCOL --brt (ovr bright) --cbrt (R bright) (G bright)
(b bright) --cnt (ovr contr) --ccnt (R contr) (G
contr) (B contr) --sat (saturation) --hue (hue) --cinv
(invert) --csp (colorspace) --gamma (gamma) --mono
(monochrome)
qm
• Definition: Test Pattern (Output or AOI)
• Required Parameters:
--och (output channel): 0,1
--aoi ( AOI test pattern)
• Parameters:
--och: 0,1
--aoi
--type:
Off = 0
HGrayRamp = 1
VGrayRamp = 2
100PColorBars = 3
16x16Grid = 4
32x32Grid = 5
Burst = 6
75PColorBars = 7
50PGray = 8
HGraySteps = 9
VGraySteps = 10
White = 11
Black = 12
SMPTE Bars = 13
--diag (diagonal motion): 0 = OFF, 1 = ON
• Query Format (AOI Output):
TP --och (output channel) --aoi --?
• Query Response: Test Pattern Settings in the following format:
TP --type (Pattern type) --diag (diagonal motion mode)
o^pqbo
• Definition: RasterBox
• Parameters:
--och (output command): 0,1