Instruction manual

ImagePRO-II • User’s Guide 5
NK==fåíêçÇìÅíáçå
ImagePRO-II Overview
fã~ÖÉmolJff=cÉ~íìêÉë
The ImagePRO-II provides the following features:
• System capabilities:
~ High-resolution Athena scaler
~ Transitions through black or a logo
~ 1 RU chassis
~ SD, HD, and 3Gbit SDI I/O
~ Dual-link DVI/HDCP I/O
~ HDMI/HDCP I/O
~ DisplayPort/HDCP I/O
~ Loop-through on DVI, HD-15, and SDI inputs
~ External Genlock input with loop-through
~ Ethernet control
~ A convenient USB port on the front panel for firmware upgrades, backup
and restore of configurations, and logo import/export
~ Programmable input and output Extended Display Identification Data
(EDID)
~ Remote control via a Web Interface or the Barco Encore (release 2.32
or higher) or ScreenPRO-II Controllers
~ Front panel lockout for remote control applications
• Superior video processing:
~ Supports input and output resolutions up to WQXGA (2560x1600)
@60 Hz
~ Frame rate up to 120Hz for 1080p
~ 12-bit processing
~ 1:1 pixel sampling for analog inputs
~ Motion adaptive de-interlacing
• A new LED Setup Menu that streamlines positioning and scaling an image for
LED wall applications
• Support for stereoscopic 3D imaging
• Dual-channel capability
• Support for embedded or external audio
• 64 independent input configuration memory presets
• Input video detection and auto-acquisition
• Input signal presence indicated on input source selection button
• Dimmable front-panel display
• Pan, Zoom, and Freeze effects
• Logo image capture and recall
• Low video delay
• Color, monochrome, and invert video effects