Instruction manual

ImagePRO-II • User’s Guide 189
B. Remote Control Protocol
ImagePRO-II Remote Commands
• Parameters:
--ocon (output connector): 0-6
0 = DVI, 1 = HD15, 2 = HDMI, 3 = DP
4 = SDI1, 5 = SDI2, 6 = BNC Composite
--ch (channel select): 0-1
--syncpol (sync polarity): 0=+H+V, 1=+H-V, 2=-H+V, 3=-H-V
--bitdepth (color bit depth): 0-6bit, 1-8bit, 2-10bit, 3-12bit
--csp (color space): 0-RGB, 1-SMPTE
• Query Format: OCON --ocon (connector) [--qall|--qsettings|--qstatus]
• Query Response: Output Connector Settings in XML format
ljdo
• Description: Output Manager settings
• Parameters:
--applyedid (connector): 0-3
0 = DVI, 1 = HD15, 2 = HDMI, 3 = DP
--save (save output configuration)
--recall (recall output configuration)
--reset (reset output configuration)
--s3dMode (3dMode)
--s3dSwap
--s3dSyncInvert (0,1)
--s3dSyncDelay (0-2048)
• Query Format: OMGR --?
• Query Response:
OMGR --s3DMode # --s3dSwap # --s3dSyncInvert #
--s3dSyncDelay #
• s3dMode: This is the 3D mode of the input
1=SideBySide,
2=TopBottom,
3=Sequential
4=LeftRight,
5=FramePacking
• s3dSwap:
0=LeftRight,
1=RightLeft,
2=LeftLeft,
3=RightRight