Instruction manual

ImagePRO-II • User’s Guide 177
^K==péÉÅáÑáÅ~íáçåë
Input and Output Resolutions
fåéìí=~åÇ=lìíéìí=oÉëçäìíáçåë
The table below lists available input and output formats supported on the DVI-I, DVI-D,
HD-15, HDMI, DisplayPort, and SDI BNC connectors. An “x” in a cell indicates that the
listed format can be processed by the connector.
For a list of the Colorspaces supported by each input connector, refer to Selecting the
Colorspace on page 37 of Chapter 4.
Note
This table lists standard ImagePRO-II formats. The list may
change with each release. Please review the list of
resolutions available with each new version of the firmware.
Table A-16. ImagePRO-II Input and Output Formats
Connectors
Format Colorspace DVI HD-15 HDMI DP
SDI
BNC
NTSC (480i) SMPTE, RGB x x
NTSC — 16:9 SMPTE, RGB x x
720x480p SMPTE, RGB x x x x
720x480p — 16:9 SMPTE, RGB x x x x
PAL (576i) SMPTE, RGB x x
PAL — 16:9 SMPTE, RGB x x
720x576p SMPTE, RGB x x x x
720x576p — 16:9 RGB x x x x
640x480 @59.94 SMPTE, RGB x x x x
640x480 @60 SMPTE, RGB x x x x
640x480 60 VESA SMPTE, RGB x x x x
640x480 @72 SMPTE, RGB x x x x
640x480 @75 SMPTE, RGB x x x x
640x480 @85 SMPTE, RGB x x x x
800x600 @50 SMPTE, RGB x x x x
800x600 @56 SMPTE, RGB x x x x
800x600 @59.94 SMPTE, RGB x x x x
800x600 @60 SMPTE, RGB x x x x
800x600 @72 SMPTE, RGB x x x x
800x600 @75 SMPTE, RGB x x x x
800x600 @85 SMPTE, RGB x x x x