Instruction manual

166 ImagePRO-II • User’s Guide
^K==péÉÅáÑáÅ~íáçåë
Audio Mezzanine Specifications
^ìÇáç=jÉòò~åáåÉ=péÉÅáÑáÅ~íáçåë
The following table lists the ImagePRO-II Audio mezzanine specifications.
Table A-4. ImagePRO-II Audio Mezzanine Specifications
Connection Detail Specification
Analog Inputs Channels 2 channels of balanced audio, each on 3
pins
Sample Rate 48 KHz
Frequency Response +/- 0.5dB, 20Hz to 20 KHz
Signal-to-Noise Ratio 90dB A-weighting
Total Harmonic Distortion + Noise -70dB @ -1dBFS
Common Mode Rejection 75dB @ 60Hz
Crosstalk -90dB @ 1KHz
Input Impedance 10K Ohms
Input Level Control +4dBu, -10dBV
Recommended Connector XLR
Recommended Cable Type 110 Ohm Differential Twinax
Digital Inputs Audio Processing 8 channels of AES/EBU inputs, 2 channels
per pin
Connection 75 ohms, unbalanced
Audio Type LPCM only
Bit Depths supported 20 or 24
Sample rates supported 48KHz or 96KHz
Recommended Connector BNC
Recommended Cable Type 75 Ohm Coax
Analog Outputs Channels 2 channels of Balanced audio, each on 3
pins
Sample Rate 48 KHz
Frequency Response +/- 0.5dB, 20Hz to 20 KHz
Signal-to-Noise Ratio 90dB A-weighting
Total Harmonic Distortion + Noise -70dB @ -1dBFS
Crosstalk -90dB @ 1KHz
Output Impedance 50 Ohms