Instruction manual

164 ImagePRO-II • User’s Guide
^K==péÉÅáÑáÅ~íáçåë
Output Specifications
Table A-2. Genlock Input Specification
lìíéìí=péÉÅáÑáÅ~íáçåë=
The following table lists the ImagePRO-II output specifications.
Input Detail Specification
Genlock Connector BNC connector
Formats NTSC/PAL blackburst
HD with tri-level sync
SMPTE bi-level sync
Loop-through Passive loop-through
Table A-3. ImagePRO-II Output Specifications
Output Detail Specification
DVI-D Connector DVI-D
Formats All single-link DVI digital formats up to 165 MHz, per
DVI 1.0 Specification
All dual-link DVI formats up to 300 MHz
EDID support EDID 1.3 compatible
HDCP hardware
support
HDCP 1.4 compatible
HD-15 Connector HD-15 VGA
Format NTSC/PAL composite on green pin
NTSC/PAL Y/C video with bi-level sync on Y only:
• Y on Green pin
• C on Red pin
SD YPbPr with bi-level sync
HD YPbPr with tri-level sync per SMPTE 274
RGBHV/RGBS/RGsB computer video with bi-level
sync
EDID support EDID 1.3 compatible
HDMI Connector HDMI (Type A)
Formats RGB and YCbCr at 4:4:4, per HDMI 1.4 specification
Resolutions up to 2048x1080p @ 60 Hz
EDID support EDID 1.3 compatible
HDCP hardware
support
HDCP 1.4 compatible
Audio Processing LPCM audio only
Max channels supported: 8