Instruction manual

ImagePRO-II • User’s Guide 163
^K==péÉÅáÑáÅ~íáçåë
Input Specifications
dÉåäçÅâ=péÉÅáÑáÅ~íáçåë
The following table lists the Genlock input specifications.
Input 3 Connector HDMI (Type A)
Formats RGB and YCbCr at 4:4:4, YCbCr at 4:4:2, per HDMI
1.4 specification
Deep color at 8/10/12 bits
Resolutions up to 2048x1080p @ 60 Hz
EDID support EDID 1.3 compatible
HDCP hardware
support
HDCP 1.4 compatible
Audio Processing LPCM audio only
Max channels supported: 8
Bit depths supported: 16, 20 or 24
Sample rate: 48 KHz
Input 4 Connector DisplayPort
Formats Resolutions up to 2560x1600 @ 60 Hz (30 bits), per
DisplayPort 1.1a Specification
EDID and HDCP
hardware support
EDID 1.3 compatible & HDCP 1.4 compatible
Audio Processing LPCM audio only
Max channels supported: 8
Bit depths supported: 16, 20 or 24
Sample rate: 48 KHz
Inputs 5 and 6 Connector SD/HD/3G SDI on BNC connector
Formats SD-SDI per SMPTE 259M-C (NTSC/PAL resolution)
HD-SDI per SMPTE 292M, 296M
3G-SDI per SMPTE 425
Loop-through Re-clocked loop-through output
Audio Processing LPCM audio only
Max channels supported: 8
Bit depths supported: 20 or 24
Sample rate: 48 KHz
Table A-1. ImagePRO-II Input Specifications
Input Detail Specification